The LC485/422 daughterboard installs into both the Falcon PLUS and Eagle PLUS transmitters and receivers to provide one-way
RS-485 or RS-422 transmission. With the LC485/422, the Falcon PLUS or Eagle PLUS can be used to control the pan, tilt, zoom of RS-485 or RS-422 dome cameras (Note: the Eagle Plus and Falcon Plus only transmit one direction. Simply adding the LC 485/422 boards will not give you bi-directional serial data and video).
This daughterboard is not required when transmitting RS-232.
Dimensions: 1.45" W X 1.5" L X 1.15" H
Connector: 4-position terminal block
Programming Cable CBLDAT-1
The CBLDAT-1 cable is required for programming data
pass-through mode on Eagle PLUS and Falcon PLUS systems using TrangoLink™ software, as well as the SDR900H using SDRLINK software. The CBLDAT-1 can also be used for programming the Access5830 using AP/SU Wizard software. The cable connects
to the Trango radio via an RJ11 and to a PC through the 9 pin
serial port.
Programming Cable CBLDAT-2 for PTZ-900
The CBLDAT-2 cable is required for programming the PTZ-900 via PC loaded with TrangoLink™ software. Each PTZ-900* transmitter
is supplied with this cable.
Replacement Power Supply PT-9001
This power transformer is supplied with Eagle PLUS, Falcon PLUS , and PTZ-900* transmitters and receivers.
Input: 120VAC, 60 Hz, 10 W
Output: 7VDC, 800 mA
* Please note that the PTZ-900 is a discontinued product.
